Mnaufacturer

manufacturer(4)
Mnaufacturer(21)

Shenzhen Flourish Electronic Technology Co., Ltd(FLOURISH)

All Products >> Mnaufacturer

Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]

fl-817type automatic forming machine for y capacitors
Specification: Size: L1260xW680xH1100mm,Weight: 200kgs
Detail: The machine is designed specially for pins cutting and forming of bulk Y capacitors and thermistors. special dies can be customized to form special shapes, such as pins-bending, K-shape, etc. There are two sets of mechanical...

fl-818type automatic tube sleeving machine for belted capacitors
Specification: Size: L900xW1150xH1600mm Weight: 250kgs
Detail: The machine is designed specially for sleeving and forming of belted capacitors. Specific forming dies can be used to form specific shapes, and length of sleeved tubes is adjustable. The machine is equipped with Mitsubishi P...

fl-606type auto loose taped axial lead former
Specification: Size: L820xW480xH740mm Weight: 60kgs
Detail: Able to cut legs of components and to bend. It also can adjust its width and length. Capacity of production can reach up to 60000pcs/h (Taped), 5000pcs/h(Loose). Quality assurance, please consult.

fl-615type horizontal magnetic-beads sleeving machine for diodes
Specification: Size: L770xW670xH1350mm Weight: 150kgs
Detail: The machine is designed specially for magnetic beads sleeving(on one end or both ends), pins cutting and forming of bulk or belted diodes. It is also equipped with durable imported SMC or AirTAC cylinder, magnet switch and so...

fl-610 type resistors forming machine-f type
Specification: Size: L1050xW550xH1100mm Weight: 100kgs
Detail: Resistor forming machine F type is the exclusive equipment for forming the resistor or diode into K shape or oblate shape. It is appropriate for cutting various carbon film fixed resistor, mental film resistor and all kinds o...

fl-608 type axial lead former uk type
Specification: Size: L1050xW550xH650mm Weight: 100kgs
Detail: Three models each for both M&C type. The differences are listed as follows. FL-608-MA/CA for Loose packed components. FL-608-MB/CB for Taped packed components. FL-608-M/C for using on both taped and loose packed components....

fl-617 automatic tube-sleeving machine for tubular fuse(vertical
Specification: Size: L1300xW700xH1400mm Weight: 350kgs
Detail: The machine is designed specially for sleeving, pins cutting and forming of bulk or belted tubular fuses, and can sleeve heat shrinkable tube on tubular fuses or Teflon tube on both pins or sleeve both types of tubes together....

fl-108 type scrapless k-shape forming machine for jumping wire
Specification: L650x W420x H420mm Weight: 50kgs
Detail: The machine controlled by Mitsubishi PLC works stably and can even work automatically without operators. Customized dies can be equipped to form jumping wires in various complicated shapes, such as K shape, V shape, inclinati...

fl-107 type automatic stripping and forming machine for teflon j
Specification: L680x W450x H420mm Weight: 50kgs
Detail: Fed by coil of Teflon jumping wire, the machine is used specifically to finish cutting, stripping and forming processes in one step. It is flexible that the ***n and pin length of jumping wire can be adjusted according to dem...

fl-106 type jumper lead wire machine-no waste
Specification: L330x W400x H520mm
Detail: Coil wire material can be fed and cut automatically. Manual operations not needed. It is not necessary to change the mold and can be adjusted L 5-30mm. The mold and cutter tool are all made of Japanese DC53 steel, which feat...


Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]
1 2 3

Shenzhen Flourish Electronic Technology Co., Ltd(FLOURISH) All Products >> Mnaufacturer

Shenzhen Flourish Electronic Technology Co., Ltd(FLOURISH)

All Products >> Mnaufacturer